If you plan to construct your driveway yourself, you do not need to reconsider, but it will only be convenient to let you know that the job is not as easy as it sounds. Building a concrete driveway requires a lot of energy and it costs money too. However, you can build your driveway by yourself even without prior experience with a good plan. When planning to build a driveway, make sure to follow each step with all carefulness. Nothing can be overlooked if you wish to get a perfect result after the tiresome work.
Step by step guide to building a perfect concrete driveway …
- Create a perfect plan for your project: Planning is the first and usually the most crucial step in any project. Planning is necessary if you don’t want to be stuck in the middle of the project due to defective materials or wrong timing.
- Choose the suitable materials that will be required: The materials you might need include timber frames; a proper frame should be at least a one-by-six board of about 10 – 12 feet long, levelers, trowels, etc. Choose the materials that will be most appropriate for your project site depending on the size of the space and the geographical location.
- Proper ground preparation: It’s not just enough to choose the suitable concrete for the project and start pouring. Ground preparation is essential to ensure a good result in the end. Dig the ground down to the proper depth. Make sure there is proper drainage aligning with the landscape of the area.
- Create a strong frame for the platform: Secure the perimeters of the floor space with solid frames to avoid concrete spilling beyond the required area.
- Estimate the amount of concrete that will be required for the area: Calculate the cubic yards of the area and compare it to the yield of concrete either by the bag or by truck depending on the project size. This will give you the estimated amount of concrete you will need for the project. This is crucial if you don’t want to run short of concrete in the middle of the job.
- Choose a professional concrete supplier: Choose a reliable concrete supplier to supply your high-quality ready-mix concrete. Ensure that the concrete supplier you will be working with is a competent one known for supplying high standard concrete that meets all the specified qualities.
- Get a volunteer from the concrete supplying company to survey the readiness of your site. Before the work kicks off, ensure to get a professional’s opinion on how ready the site is for the intended project. The opinion of a professional is invaluable.
- Pour your concrete on the prepared ground: It’s finally time to pour the concrete. Pour the concrete till it is a little above the ridge. This is to make up for settling.
- Level out the concrete: using a leveler, distribute the concrete till the surface is evenly distributed. Use a trowel to make any design of your choice at the top.
- Concrete curing: Hydration is the chemical reaction between cement and water, which results in different chemicals that aid in setting and hardening. This is why curing is essential. When concrete is allowed to cure properly, it will be strong enough to withstand time. Pour enough water to cover the surface of the concrete to aid hydration. Alternative to pouring water, you can cover the surface e with a polyester bag to reduce the rate of evaporation. Curing should be maintained at a temperature between 50°F – 90°F.
- Allow drying for at least one week before applying weight on the surface. The concrete floor is ready to be walked on after drying for three days, but it can only stand heavyweight after at least seven days.
Wrapping Up …
A driveway should be at least four inches thick for passenger car driveways. But a driveway for heavier vehicles should be at least five inches thick. The driveway should be sloped appropriately down for proper drainage. You can make this a minimum of 1/8 inches per foot from the high level downwards towards the intended direction of the slope.
Why not check out our concrete for housing applications to help with your next project?